# SIP Default Generic Configuration File # Image Version image_version: P0S3-08-4-00
# SIP Server proxy1_address: ""; SIP Server 1 proxy2_address: ""; SIP Server 2 proxy3_address: ""; SIP Server 3 proxy4_address: ""; SIP Server 4 proxy5_address: ""; SIP Server 5 proxy6_address: ""; SIP Server 6
# SIP Server Port "5060" proxy1_port: 5060 proxy2_port: 5061 proxy3_port: 5062 proxy4_port: 5063 proxy5_port: 5064 proxy6_port: 5065
# Proxy Registration (0-disable (default), 1-enable) proxy_register: 1
# Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: 500
# Codec for media stream (g711ulaw (default), g711alaw, g729a) preferred_codec: g711ulaw
# TOS bits in media stream [0-5] (Default - 5) tos_media: 5
# Inband DTMF Settings (0-disable, 1-enable (default)) dtmf_inband: 1
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt ) dtmf_outofband: avt
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up) dtmf_db_level: 3
# SIP Timers timer_t1: 500 ; Default 500 msec timer_t2: 4000 ; Default 4 sec sip_retx: 10; Default 10 sip_invite_retx: 6 ; Default 6 timer_invite_expires: 180 ; Default 180 sec
####### New Parameters added in Release 2.0 #######
# Dialplan template (.xml format file relative to the TFTP root directory) dial_template: dialplan
# TFTP Phone Specific Configuration File Directory tftp_cfg_dir: ""; Example: ./sip_phone/ # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "192.53.103.104"; SNTP Server IP Address sntp_mode: unicast; unicast, multicast, anycast, or directedbroadcast (default) time_zone: CET; Time Zone Phone is in dst_offset: 1; Offset from Phone's time when DST is in effect dst_start_month: April; Month in which DST starts dst_start_day: ""; Day of month in which DST starts dst_start_day_of_week: Sun; Day of week in which DST starts dst_start_week_of_month: 1; Week of month in which DST starts dst_start_time: 02; Time of day in which DST starts dst_stop_month: Oct; Month in which DST stops dst_stop_day: ""; Day of month in which DST stops dst_stop_day_of_week: Sunday; Day of week in which DST stops dst_stop_week_of_month: 8; Week of month in which DST stops 8=last week of month dst_stop_time: 2; Time of day in which DST stops dst_auto_adjust: 1; Enable(1-Default)/Disable(0) DST automatic adjustment time_format_24hr: 1; Enable(1 - 24Hr Default)/Disable(0 - 12Hr)
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control) dnd_control: 0; Default 0 (Do Not Disturb feature is off)
# Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control) callerid_blocking: 0; Default 0 (Disable sending all calls as anonymous)
# Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) anonymous_call_block: 0; Default 0 (Disable blocking of anonymous calls)
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) dtmf_avt_payload: 101; Default 101
# Sync value of the phone used for remote reset sync: 1; Default 1
####### New Parameters added in Release 2.1 #######
# Backup Proxy Support proxy_backup: ""; Dotted IP of Backup Proxy proxy_backup_port: 5060; Backup Proxy port (default is 5060)
# Emergency Proxy Support proxy_emergency: "" ; Dotted IP of Emergency Proxy proxy_emergency_port: 5060; Emergency Proxy port (default is 5060)
# Configurable VAD option enable_vad: 0; VAD setting 0-disable (Default), 1-enable
####### New Parameters added in Release 2.2 ######
# NAT/Firewall Traversal nat_enable: 0 ; 0-Disabled (default), 1-Enabled nat_address: "" ; WAN IP address of NAT box (dotted IP or DNS A record only) voip_control_port: 5060 ; UDP port used for SIP messages (default - 5060) start_media_port: 16384 ; Start RTP range for media (default - 16384) end_media_port: 32766 ; End RTP range for media (default - 32766) nat_received_processing: 1; 0-Disabled (default), 1-Enabled
# Outbound Proxy Support outbound_proxy: "" ; restricted to dotted IP or DNS A record only outbound_proxy_port: 5060 ; default is 5060
####### New Parameter added in Release 3.0 #######
# Allow for the bridge on a 3way call to join remaining parties upon hangup cnf_join_enable : 1; 0-Disabled, 1-Enabled (default)
####### New Parameters added in Release 3.1 #######
# Allow Transfer to be completed while target phone is still ringing semi_attended_transfer: 1; 0-Disabled, 1-Enabled (default)
# Telnet Level (enable or disable the ability to telnet into the phone) telnet_level: 2; 0-Disabled (default), 1-Enabled, 2-Privileged
####### New Parameters added in Release 4.0 #######
# XML URLs services_url: ""; URL for external Phone Services directory_url: ""; URL for external Directory location logo_url: ""; URL for branding logo to be used on phone display
# HTTP Proxy Support http_proxy_addr: ""; Address of HTTP Proxy server http_proxy_port: 80; Port of HTTP Proxy Server (80-default)
# Dynamic DNS/TFTP Support dyn_dns_addr_1: "" ; restricted to dotted IP dyn_dns_addr_2: "" ; restricted to dotted IP dyn_tftp_addr: "" ; restricted to dotted IP
# Remote Party ID remote_party_id: 0; 0-Disabled (default), 1-Enabled
####### New Parameters added in Release 4.4 #######
# Call Hold Ringback (0-off, 1-on, 2-off with no user control, 3-on with no user control) call_hold_ringback: 0; Default 0 (Call Hold Ringback feature is off)
####### New Parameters added in Release 6.0 #######
# Dialtone Stutter for MWI stutter_msg_waiting: 0; 0-Disabled (default), 1-Enabled
# RTP Call Statistics (SIP BYE/200 OK message exchange) call_stats: 0; 0-Disabled (default), 1-Enabled
|