Cisco CP-7940
Auch das CP-7940 kann man per SIP anmelden, hier für ist ein SIP Image für das Telefon Vorraussetzung. Grundlegend erfolgt die Konfiguration so wie bei den anderen Modellen, entsprechende SIP{mac}.cnf für die SIP Anmeldung vorausgesetzt.
SIP{mac}.cnf
# Proxy Server / je Line eine Adresse proxy1_address: "IP Asterisk Line 1" proxy2_address: "IP Asterisk Line 2" proxy3_address: "" proxy4_address: "" proxy5_address: "" proxy6_address: ""
# Line 1 line1_name: "4050" # Line 1 Name line1_displayname: "4050" # Line 1 Display Name line1_shortname: "4050" # Line 1 kurzer Name line1_authname: "4050" # Line 1 Anmeldename line1_password: "1234" # Line 1 Anmeldepasswort
#Line 2 Settings line2_name: "4051" line2_displayname: "4051" line2_authname: "4051" line2_password: "1234"
# Emergency Proxy info #proxy_emergency: "0" #proxy_emergency_port: "5060"
# Backup Proxy info #proxy_backup: "0" #proxy_backup_port: "5060"
# Outbound Proxy info outbound_proxy: "0" outbound_proxy_port: "5060"
# Proxy Registration (0-disable (default), 1-enable) proxy_register: "1"
# NAT/Firewall Traversal nat_enable: "0" #nat_address: "" #voip_control_port: "5060" #start_media_port: "16384" #end_media_port: "32766" #nat_received_processing: "1"
# Phone Label (der steht oben Rechts im Display) phone_label: "Cisco SIP-Phone "
# Time Zone phone will reside in time_zone: CET
# Telnet Level (enable or disable the ability to telnet into this phone telnet_level: "2" # 0-Disabled (default), 1-Enabled, 2-Privileged
# Phone prompt/password for telnet/console session #phone_prompt: "" # Telnet/Console Prompt #phone_password: "" # Telnet/Console Password
# Enable_VAD (1-enabled, 0-disabled) enable_vad: "0"
# Network Media Type (auto, full100, full10, half100, half10) network_media_type: "auto" user_info: phone
Zurück
|